Toftegårdsvej 32 | 9900 Frederikshavn
Tlf. +45 28 49 41 27 | email@example.com
Hz acoustic panel 009 must be mechanically fixed via 4 pre-drilled holes in the pre-treatment. Areas of use are ceilings and walls where removal and minimisation of noise through construction are desired. Fixing can be done directly on solid support surfaces or on laths.
Hz acoustic panels consist of custom-made recyclable hard glass wool sheet (sheet 003), and rock wool sheet (009) laminated with a custom-made 10 mm waterproof glass granulate sheet, of which 100% is recycled material.
Panels are stored free of frost and moisture. The temperature must not exceed 40 degrees Celsius and panels must not be stored in direct sunlight.
The panels are screwed up with suitable screws in accordance with the supporting surface. Washers (minimum ø 18 mm) are used to prevent screws from sinking into rock wool/glass wool. Dowels can also be used. Panels are mounted with the long side facing the direction of light, and make staggered joints.
The holes are sealed with the provided glass granulate discs. Use Hz fill in all joints of panels. Read the supplier’s instructions.
At 20 degrees Celsius and 50% RH, the fill for joints and holes is dry after 1 hour, and can then be sanded with a drywall polisher connected to a vacuum cleaner. Use grain 24.
The 1st coat of plaster or primer for Hz silicate plaster can then be applied the same day.
For information on safety during transport, storage, handling and disposal, see the Safety Data Sheet for the product. The above statements, including particular suggestions for the processing and use of our product, are based on our knowledge and experience in normal cases and assume that the products are stored and used correctly. Due to different materials, supporting surfaces and working conditions, no general guarantee can be given for the outcome or adhesion. It is the responsibility of the user of the products at all times to verify their suitability for the purpose.
|Panel thickness||50 mm – 4 holes|
|Panel format||600 x 800 mm (0.48 m2)|
|Thermal conductivity (DS/EN 12667):||λᴅ (W/m∙K) 0.035|
|Water vapour transmission (DS/EN 12086):||MU1|
|Short-term water absorption (DS/EN 1609):||WS (≤ 1.0 kg/m²) WS|
|Fire class||A2-s, d0 in accordance with EN 13501-1|