Hz Dual Acoustic Panel 009-R

Products > Hz Dual > Hz Dual Acoustic Panel 009-R

An acoustic panel made from recycled textile and glass granulate, must be finished with our acoustic plaster.

The Dual 009-R acoustic panel is suitable for flat or slightly curved surfaces that are solid and stable. The panels must be screwed in place. If you need adhesive-mounted panels, check out our Hz Basic acoustic panels.

Material

The Dual 009-R acoustic panel consists of:

Textile board made from recycled textile waste (23 mm)
Glass granulate made from 100% recycled material (9 mm)
Total thickness: 32 mm

Application

The Hz Dual 011-R acoustic panel must be mechanically fastened through four pre-drilled holes in the factory-prepared surface.
It is ideal for ceilings and walls where sound transmission through the structure needs to be reduced or minimized. Mounting can be done directly on a solid surface or onto battens.

Storage

Panels must be stored in a dry, frost-free environment. Temperature must not exceed 40°C. Panels must not be exposed to direct sunlight.

Installation

Panels are screwed in place with suitable screws, depending on the substrate. Washers (minimum Ø 18 mm) should be used to prevent screws from sinking into the textile board. Anchors can also be used for extra stability. Panels should be installed with the long side aligned with the light direction, ensuring staggered joints for optimal stability. Pre-drilled holes are sealed with included glass granulate plugs. Hz Fill must be used in all panel joints for a seamless finish. Always follow the supplier’s instructions for correct installation.

Drying time

At 20°C and 50% relative humidity (RH): Fill for joints and holes dries within 1 hour and can then be sanded using a dust-extracting drywall sander. Plastering can be done on the same day.

Instructions

For safety information regarding transport, storage, handling, and disposal, refer to the product safety data sheet. The above specifications, including processing and application recommendations, are based on our knowledge and experience under normal conditions and assume that the products are stored and used correctly. Due to variations in materials, substrates, and working conditions, we cannot provide a general guarantee for the outcome or adhesion. It is always the responsibility of the user to verify whether the product is suitable for the intended purpose.

Specifications

Panel thickness	32 mm – 4 holes
Panel format	600 x 800 mm (0,48 m2)
Use	2.083 panels per m²
Thermal conductivity (DS/EN 12667):	λᴅ (W/m∙K) 0.035
Water vapour transmission (DS/EN 12086):	MU1
Short-term water absorption (DS/EN 1609):	WS (≤ 1,0 kg/m²) WS
Fire class	A2-s, d0 in accordance to EN 13501-1